|
Good morning. Thought I'd send
you an email congratulating you on the coolest microcontroller kit I've
ever had the pleasure of assembling. I bought one of your M32 kits
and it's excellent. It appears to be very well thought out and made,
with a nicely optimized parts list. I sure wish I knew about this
kit last year for my university robot course, it would have made things
much easier.
Mark Weston
Hey Eddy,
I just wanted stop by and thank you for all the help with the RS232
Converter I ordered. I got it installed on my system here and it's working
great after the rewiring I discussed with you. Thanks a lot for all the
feedback earlier and I really appreciate you going out of your way to send
me that converter board (I ended up powering it off the 5V supply here :/)
It's not everyday you find a great shop run by a great guy.
Best Wishes,
Ehren
Eddy,
Just wanted to let you know that I finally put my M32 board together
tonight. It's been almost 2 months since I got it but my project is
getting close to needing it.
I spent 40 minutes populating the components on the board and another 30
minutes testing it with the programming cable and BASCOM. It took 30
minutes because I was making darned sure that I didn't screw up the fuse
bit settings to use an external 16mhz resonator. All is WELL!!!!!
Happy dance time!!
This is a really nice board. Very straight forward. It worked
from the get go. You can't ask for much better than that. I will
definitely give credit to you and your company if I ever get a chance to
write up my project. At least, I
will let everyone know about the M32. It really is an excellent
product and satisfies my needs quite well.
Thanks dude. You done gud!!!!!
--
Jay
AJ4AY
Mobile, AL
QRP-L 1372 FP -115
"Eddy, I wanted to thank you for pointing me to the Atmel Mega8
microcontroller. I'm putting together a kind of "electronic/robotic
erector set" Getting parts here and there. Motors, gears, drive
trains and the like. I needed something very versatile to control all this
stuff from one experiment to the next. Your DevBoard-M8 is just the
ticket! Its the easiest microcontroller to program that I've ever seen. I
was able to start running experiments using the counter/timers as soon as
I hooked the Dev board up. I really like the Bascom compiler you included
on the CD also, simple and quick. Thanks also for answering all my
questions on the board so quickly and providing me with TONS of sample
programs. Well I've got the DevBoard fully integrated into my Proto Board
space and fully instrumented, so I'm off to the Lab."
- Alan Martin
IPeverywherelab
Germantown MD
|
